 (1).JPG)
_(1).jpg)
_(2).jpg)
_(3).jpg)
_(4).jpg)
_(5).jpg)
_(6).jpg)
_(7).jpg)
_(8).jpg)
_(9).jpg)
_(10).jpg)
_(11).jpg)
_(12).jpg)
_(13).jpg)
_(14).jpg)
_(2).JPG)
_(1).JPG)
_(4).JPG)
_(3).JPG)
_(5).JPG)
_(6).JPG)
_(7).JPG)
_(8).JPG)
_(9).JPG)
_(10).JPG)
HAAS VM-6 MOLDMAKER 2021 £POA
Kühlmittel durch die Spindel, Werkzeugvermessung, Kühlmitteleinrichtung, Lampe
| Steuerung | HAAS |
| Memory | 32gb |
| Maximum workpiece weight | 1814kg |
| T- Slots | Micro-Loc 16mm (78 x 1/2" UNC bolt locations) |
| Tischfläche | 1626 x 711mm |
| XYZ Weg | 1626 x 813 x 762mm |
| Eilgang | 15.2m/minute |
| Min - Max Height under Spindle | 94 - 762mm |
| Spindelmotor | 40Hp |
| Drehzahlbereich | 15000rpm |
| Maximum Tool Diameter | 64mm (127mm if adjacent pocket empty) |
| Maximum Tool Length | 406mm |
| Maximum Tool Weight | 5.4kg |
| Werkzeugmagazin | 50 Station |
| Tool Change Time (Chip to Chip) | 3.6 seconds |
| Tool Size | BT40 |
| Raumbedarf | 4521 x 2921 x 3277mm |
| Maschinengewicht (Kg) | 10887kg |
| machen | HAAS |
| Modell | VM-6 MOLDMAKER |
| Jahr | 2021 |
| Seriennummer | 1187207 |
| Art | Vertical Machining Centres |
| Preis | £POA |
| unsere Referenz | PM9043 |
| Lage | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing
 (16).JPG)
 (25).JPG)
 (17).JPG)